compact powder coating plant for aluminium profile

Model: COLO-L

Item specifics

Condition: New

Type: aluminium profile Powder Coating Production Line

Substrate: Iron

Coating: Powder Coating

Voltage: As required

Power(W): As required

Dimension(L*W*H): As required

Weight: As required

Certification: CE

Warranty: 1 year

Review

Description

compact powder coating plant

compact powder coating plant video

https://www.youtube.com/watch?v=LtQYojqgnnI

Advantage:

1,Only two operators are required for the whole plant

2,Given the small demensions of the booth a perfect cloud of powder is achieved which allow a uniform painting of the complete surface of the profile without need of any manual touch-up

3,Color change is carried our in a very quick and easy way thanks to the redeuced dimensions of the booth walls

4,Very low energy consumption,thanks to the piece passage openning which are located on the bottom wall of the oven as the heat trends to rise

5,Thanks to the smal volume of the booth ,the suction and powder recovery system work perfectly,thus permitting a very reduced powder consumption

6,If the plant is equipped with two booths,while one is working ,the second can undergo cleaning without any downtime for color change.

7,Very reduced space is required to install the plant.

The palnt is made of :

1,Dry oven

2,Powder coating system

3,double conveyor

4, electrical control board

Powder coating line process:

The Automatic Powder Coating Line Including The Following Six Parts:

Part One Pretreatment System

Here by pretreatment, we mean metal pretreatment as the powder coating is predominantly applied to metals.

Pretreatment is the base for powder coating. It is said that you can not make a good coating work with poor pretreatment.

The powder coating pretreatment include mechanical or chemical:

Mechanical cleaningincludes methods like scratch brushing and sand blasting.

Chemical cleaningincludes removal of dirt, oil and grease.

Engineer in COLO will analyze your requirements to design different pretreatment system for you. Include sandblasting, spraying system or immersing.

Part Two Drying System

The drying system is for drying the wet workpiece after pre-treatment, It is design according to different requirement. The temperature about 100 degree centigrade for 10-15 mins.

Part Three Powder coating booth with powder recovery system

Our powder spray booth is easy to clean, resulting in a quick color change and is safe to operate. No powder spillage out of the booth .

The powder recovery system could be multi-cyclone, Mono-cyclone and filters.

Material of the powder spray booth could be plastic, stainless steel, powder coated carbon steel

Part Four Electrostatic powder coating spray gun

The electrostatic powder gun manufacture in COLO with high powder adhere to the workpiece, reduce the powder waste. COLO developed the new technology in powder coating gun every year.

Part Five Powder Curing system

Curing oven could make as tunnel curing oven and bridge powder curing oven. With temperature 180-200 degree centigrade for 15-20mins. Energy could be electric, natural gas, or diesel.

Part Six Conveyor system

According to different weight produce and the requirements of customer, COLO engineers will select different type conveyor . could be close circuit continue conveyor ,line conveyor or power and free conveyor as .