Manual electrostatic Box feed unit Powder coating machine for all kinds of shapes
- Price
- US $1600
- Model
- COLO-OPTI-B-2
- MOQ
- 1 piece
Item specifics
- Condition
- New
- Type
- Manual powder coating machine
- Substrate
- Steel
- Coating
- Powder Coating
- Voltage
- 100-240V
- Power(W)
- 50W
- Dimension(L*W*H)
- 120*80*80CM
- Weight
- 75KGS
- Certification
- CE
- Warranty
- 1 YEAR
Review
Description
- Processing the powder directly from the original powder manufacturer's container
- Total emptying of the powder container due to inclined vibrating base
- Quick and simple color change
- Supplied ready for use
Description
- Box feed unit
2. Copy model
3. Carton size :118x79x73cm G.W:80kgs
1 control unit
2 manual powder gun
3 injector
4 Frame with hand rail
5 Fluidizing/suction unit
6 Vibrating base
7 Swivel wheel
8 Swivel arm with guide sleeve
9 Filter unit
10 Hose holder
11 Gun holder
12 Rubber wheel
The control unit - Optistar
Spare parts of manual powder gun
Electrical data
1. Power range 220V/110V
2. Frequency 50HZ /60HZ
3. Temperature range in use -10 ℃+50 ℃
Powder Gun
1. Gun weight: ……………… 500G
2. Rated output voltage ……… 24VDC
3. Input voltage …………… - 200kv
4. Maximum output current ……… 180Ua(max)
5. Maximum output voltage………… 0-100KV ( adjustable)
6. Maximum powder injection :……… 600g/min
7. Polarity ……………… negative (-)
Pneumatic data
1. Maximum input-air pressure ………….. 10kg/cm
2. Optimum input-air pressure…….. 6kg/cm
3. Minimum input-air pressure …… 4kg/cm
4. Maximum water vapor content or compressed air ….. 1.4g/N m3
5. Maximum oil vapor content of compressed air …….. 0.1ppm
6. Maximum compressed-air consumption……… 13.2 m3/h
-INSTALLATION
→Propery ground all equipment in the spray area to an earth ground and maintain this ground
→Remove all containers of volatiles from the spray area
→Establish and maintain a grounded area for the spray operator
→The gun of xseries must be connect to control unit
→OPERATION
→The operator should hold the gun in his bare hand
→If gloves are worm ,the palm should be out to assure skin to metal contact
→The operator should wear shoes with conductive shoes e.g leather
Rubber shoes are not conductive .
→Ground the tip of the gun before cleaning or changing nozzles.
→When the gun is not in use , it should be hung so that the nozzle is within four inches of a grounded conductor
→The operator should wear a filter-type respiator anytime he is exposed to dusty conditions
→High pressure powder many cause injury ,Keep the rear switch “off” position in no –use condiction
MAINTENANCE
→Make a periodic confirmation of grounding to earh of all equipment in the spray area .
→Exercise good housekeeping practices , do not allow dirt or powder to accumulate on the feeder /powder unit , cable or gun.
→Keep the cabinet door
Advanced production equipment and precise technology level guarantee the first class quality.
Colo is the best brand in China with Professional team, which can provide Excellent service.
1. All requirements for powder coating can be meeted, namely designing, manufacturing, assembling, commissoning and training.
2. All equipments for powder coating can be provided, like powder coating machines, powder coating guns and related spare parts,spray booths, curing ovens, reciprocators, powder coating lines.
3. Technical support for all kinds of powder coating line,manual or semi-auto or full auto lines.
Colo is the leading powder coating equipment manufacturer in China, which provides high quality equipments
to more than 90 countries all oven the world with advanced manufacturing machines and professional
technicians. Colo offers a wide range of power coating equipments, namely powder coating machine, power
coating gun, spray booth, curing oven, automatic powder coating applicator, powder coating line and
replacement of spare parts for the famous brand in the world.
