K1 powder injector IJ9000
- Model
- IJ9000
Item specifics
- Used for
- electrostatic powder coating
- how long deliver
- 1-2 days after payment
- MOQ
- 1 piece
- lifetime
- depend on different type powder
Review
Description
K1 powder injector IJ9000
The powder injector is used to convey normal organic powders betweenthe powder hopper and the powder gun.
Components of K1 powder injector IJ9000
Drawing No. | Q'ty | Description | Specification |
1 | 1 | Injector Body | 79×75×20 |
2 | 1 | Insert Sleeve | φ13×70 |
3 | 1 | Sleeve Holder | φ19×53.7 |
4 | 1 | Sleeve Holder Nut | φ30.8×19 |
5 | 1 | O-Ring | φ12×1.5 |
6 | 1 | O-Ring | φ8.5×1.5 |
7 | 2 | O-Ring | φ11.8×2.4 |
8 | 1 | Conveying Air Connector | QCM1/8-φ8 |
9 | 1 | Conveying Air Coupler | QCφ8 |
10 | 1 | Dosing Air Connector | QCM1/8-φ6 |
11 | 1 | Dosing Air Coupler | QCφ6 |
12 | 2 | Injector Nozzle | 22×φ6.8 |
13 | 3 | Nut | 1/4 |
14 | 1 | Injector Unit | 30×115×150 |
Apply to powder coating equipment
Principle of K1 powder injector IJ9000 and influence of supplementary air
If air flows through the nozzle into the cavity, a vacuum is created in thecavity (see figure below).
This vacuum causes powder to be drawn upthe suction tube and into the cavity. A powder/air mixture is created.
Theforward air velocity at the nozzle conveys the powder/air mixture throughto the powder hose to the gun.
