aluminum profiles paint coating unit

aluminum profiles  powder spray unit

used for COLO-500-PGC1,interchangeable with PGC1 control unit, could use with original  PG2A automatic gun,PG1 hand spray gun.

Colo-500-PGC1

excellent transfer efficiency,

superior powder penetration

built-in high voltage electrostatic generator

economic stand wear and tear

the function and technical data same as PGC1

0-100 Digital Adjustable KV 
Fully Adjustable Amperage 
PGC1 Control Unit with PG1 powder coating gun
Fully Adjustable Air for Pump on Pressure,

Dosage and Nozzle Rinsing Air
Comes with Full Array of Nozzle Assortment
Field Tested and Proven to operate in the toughest environments
Comes with different array of delivery systems:
Hope Feed - 45L

this system is specially balanced for the maximum spray capability with 
the Smoothest Finish Possible.

Quick Details:

Manual coating equipment Function description

the powder gun through the powder hose . The powder is electrostatically

charged at the nozzle of the gun. In addition, an electrostatic field is

created between the gun nozzle and the grounded object. The charged

powder spray remains adhered to the surface of the object.

The powder is fluidized by air forced through a porous plastic plate from

below. The powder acquires, thereby, fluid-like characteristics.

The conveying air, supplementary air, and rinsing air are set on the control Unit

Technical Data

Power range                                   220v/110v

Frequency                                     50/60HZ

Temperature range in use                      -10 °C+50 °C

Powder Gun

Gun weight:    ………………                    500G

Rated output voltage ………                      24VDC

Input voltage     ……………                       - 200kv

Maximum output current  ………                   180Ua(max)

Maximum output voltage…………                   0-100KV (  adjustable)   

Maximum powder injection :………                    600g/min

Polarity ………………                                negative (-)  

Pneumatic technical spec

Maximum input-air pressure …………..                 8kg/cm

Optimum input-air pressure……..                        6kg/cm

Minimum input-air pressure   ……                      4kg/cm

Maximum water vapor content or compressed air …..      1.4g/N m3 

Maximum oil vapor content of compressed air   ……..     0.1ppm

Maximum cimpressed-air consumption………            13.2 m3/h

Including following parts

control unit with a trolley

control unit power supply cable

air filter

air pressure regulator

fluidized powder hopper (45L)

A plug-in injector

manual powder gun with gun cable,

Powder hose

rinsing air hose and standard nozzle set.

Pneumatic hoses for conveying air (red),

Supplementary air (black)

fluidizing air (black)

powder hose

Ground wire

Company information:

Hangzhou Color Powder Coating Equipment Co., Ltd. is located in the electrostatic generator production base- Hangzhou Gongshu Economic Park, and from it to Hangzhou electronic market less than 10 minutes, it is Convenient for us to control the latest technology developments so that our products have been in the forefront of the market. "Quality first, innovative, valuable services" is our endless purpose." With the efforts of all staff, we have developed into a manufacturing company that Professional in research and development, production, sales and service in the line of the electrostatic powder coating equipment. Our main products are: Electrostatic generators, electrostatic spray gun, high pressure module, circuit board, powder hopper, automatic reciprocating machines, we will make use of advanced technology, strict quality management system and improve the sense of responsibility, to make our products COLO become the top one in the powder coating industry. 

Our machines can spray well in a variety of work-piece shapes, it efficiently solve the penetration problems on the corners and recesses. At the same time, with the intelligent method design, it is easy for operation. We will make unremitting efforts to promote the electrostatic powder coating industry as our responsibility. With advanced production and testing equipment, in the high-quality technology and excellent and design of the joint efforts of staff, the annual production of electrostatic generators more than 5, 000 sets of, circuit boards, modules, more than 30, 000 sets of the spray gun. COLO Coating Equipment has opened up not only the China local market and has been successfully exported to Mexico, Colombia, Peru, Canada, the United States, Brazil, Russia, Poland, France, Germany, Italy, Egypt, Vietnam, India, Saudi Arabia, South Africa and other countries, and get the Satisfaction with different clients.