Manual Powder Coating Equipment for Steel Pipe
- Price
- US $1-800
- Model
- 610V
- MOQ
- 1 piece
Item specifics
- Condition
- New
- Type
- Coating Spray Gun
- Substrate
- Copper
- Coating
- Powder Coating
- Voltage
- 110/220V
- Power(W)
- 50W
- Dimension(L*W*H)
- 69*56*52CM
- Weight
- 35KGS
- Certification
- CE
- powder coating machine
- manual
- function
- spray powder on metal workpiece
- technical date
- pulse
- powder hopper
- no need
- MOQ
- 1 piece
- Guarantee
- 1 Year
Review
Description
Manual Powder Coating Equipment for steel pipe
The process of the coating is like this: The powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns. The guns spray a powder/air mixture onto the workpieces
COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including manual powder coating equipment, automatic equipment, spray booths,ovens and spare parts for itw gema, wagner, nodrson, kci famous brand in China.
China Powder coating gun, China powder coating machine, China powder coating system, China powder coating equipment, powder coating control unit,manual powder coating machine,manual powder coating equipment, manual powder coating gun, electrostatic powder coating equipment
Technical Data:
Control air unit
Input voltage: 220V/110V | Frequency: 50HZ/60HZ | Input power:50W |
Output voltage:Max 20V(peak to peak) | Output current: 0.7 A | Control voltage: 24V/DC |
Work temperature range: -5°C-40°C | Safety: IP54 | |
Compressed air moisture content: 1.3g/m3 max | Input air pressure:4-8kg/m3 | |
Input barometric pressure: 6-8 bar | The largest air consumption:24m3/h | |
Powder spray gun
High Pressure Mode: Inside | Max Power Injection: 650g/min | Max Output Current:150uA |
Polarity: Negative | Output voltage: 0-100KV max | Gun weight: 550g |
Output voltage:Max 20V(peak to peak) | Connection cable: 5M | |
Pulsed Electrostatic Powder Coating Equipment
Advantages( COLO 610V and 610) similar like KCI 201 model
Pulse Powder coating system technology provides excellent transfer efficiencies, superior powder penetration, and a quality finish with no gun adjustments needed.
Powder feed system with air purge for faster, easier maintenance.
1. Save powder by 20% compare to Electrostatic Coating ,for the average thickness of our products is 60 μm compare to 70 μm of the latter.
2. Can coat the objects' deepest corner by charging the powder continuously with low current and high voltage.
3. Can reduce orange peel effect significantly compare to common Electrostatic Coating .
4.Work well with pretreatment machine,reciprocator,powder recycle system,coating booth,oven to form a whole powder coating process
We also can supply powder parts replacement of famous powder coating machine , same function,but times lower price!!!
