Powder Coating Spray Machine
- Model
- COLO-800
Item specifics
- Condition
- New
- Type
- Coating Production Line
- Substrate
- Iron
- Coating
- Powder Coating
- Power(W)
- 50W
- Dimension(L*W*H)
- 120x79x73cm
- Weight
- 55kg
- Certification
- CE
- Warranty
- 1 YEAR
- After-sales Service Provided
- Overseas service center available
- Spray Machine
- powder coating
Review
Description
electrostatic Powder coating machine with powder coating gun,powder coating machine.
Brief Introduction
The process of the powder coating is like this: The powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns. The guns spray a powder/air mixture onto the workpieces
Specification
0-100 Digital Adjustable KV
Fully Adjustable Amperage
With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Hope Feed - 55L
Because this system is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.
Electrical data |
|
Mains input voltage | 100-240 VAC |
Operating frequency | 50-60 Hz |
Input power | 50W |
Nominal output voltage (to the gun) | max. 12 V |
Nominal output current (to the gun) | max. 1 A |
| IP54 |
Ambient temperature range | 0°C - +40°C (+32°F - +104°F) |
Max. operating temperature | 85°C (+185°F) |
Approvals | CE |
|
|
Pneumatical data |
|
Compressed air connection | 1/4" male quick release |
Max. input pressure | 10 bar / 145 psi |
Min. input pressure (while unit in operation) | 6 bar / 87 psi |
Max. water vapor content of the compressed | air 1.3 g/m³ |
Max. oil vapor content of the compressed air | 0.1 mg/m³ |
|
|
Packing Dimensions |
|
Length | 120CM |
Width | 79CM |
Height | 73CM |
Weight | approx. 55kgs |
at same time with two different models
COLO-800T- C (cup gun )
colo-800D -H( mini hopper model ) 
Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermosetpolymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as "whiteware," aluminium extrusions, and automobile and bicycle parts. Newer technologies allow other materials, such as MDF (medium-density fibreboard), to be powder coated using different methods.
The powder coating process involves three basic steps:
- Part preparation or the pre-treatment
- The powder application
- Curing
COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including automated equipment, spray booths and spare parts famous brand in china.
FACTORY
Any questions,please contact us
powder coating gun, powder coating machine, powder coating system,powder coating equipment,powder coating control unit
