box feeder Manual Powder Coating Equipment (Colo-500V)

Vibrating Manual Powder Coating Equipment

If your production requires frequent and quick color changes?       
Then we would recommend the Colo-500V , which is designed to use the powder manufacturer's original carton.  Highest flexibility, Minimal color change times, For direct transport from the original powder carton, Complete emptying of the powder box thanks to the tilted vibrating base , Integrated Fluidisation
B. Technical Data
1. Electronic control:
Input voltage: 220-240V 50Hz
Input power: 40VA
Output voltage: 0-50VAC
Output frequency: About 17KHz
Output current: 0-0.8A
Pneumatic control:
Input air pressure: 8bar
Output air pressure: 0-6bar
The air source quality: Moisture capacity less than 15g/NM3 oil content less than 0.1mg/NM3
Powder spraying pistol:
Input voltage: 0-50VAC
Input current: 0-0.8A
Output voltage: 0-100KV. DC
Output current: 0-0.15MA
Powder output: About 500g/min (3.5bar output air pressure)