High quality no wear three phase motor automatic powder coating reciprocator
- Price
- US $800-3000
- Model
- COLO-2000D
- MOQ
- 1 piece
Item specifics
- Brand Name:
- colo
- stroke
- 1.8m
- Extra Services:
- Painting / Powder Coating
- Automation:
- automatic
- weight:
- 300kgs
- Material / Metal:
- Aluminum
- Voltage:
- 220V/110V
- Power(W):
- 2.5kw
- Certification:
- CE/ISO
- Warranty:
- 1 YEAR
Review
Description
Advantages and characteristics:
1.The high-quality import transducer
2.It is driven by non-abrasion three-phase motor and repair is simple.
3.The travel and speed are easy for alteration together with the settings.
4.The machine is applicable for powder spray,paint spray and spray of work-pieces with high
standard.
5.The complete control program of the machine will guarantee accurate orientation.
Technical Data
General information
Maximum available programs | 80 |
Max stoke height | 2.8m |
Maximum speed | 0.8m/s |
Minimum speed | 0.08m/s |
acceleration | 0.1m/s2 |
Electrical data
Nominal input voltage | 170-264VAC single phase |
Tolerance | +10%/-10% |
frequency | 50/60hz |
Fuse | 10.0AT |
Power consumption | 2.5kw |
Dimensions
width | 0.7M |
Depth | 0.7M |
Height(1.5M/2M/2.5M) | 2.4/2.9/3.4M |
weight | 150kgs |
Installation Instructions
1) Wire connecting guiding: 
1. Make sure it is grounded well before using ,the resistor＜100 Ohm.
2. Reciprocator must controlled by the single phase power ,and it can be cut off at any time.
2)Machinery install:
Temperature: -10℃ ～ +50℃
Altitude: ＜1500m
Attack :avoid attack on the control unit
Shaking :do not put the control unit on the shaking place.
electromagnetic interference :do not put the control unit on the place that is around the electromagnetic source.
Air pollution: do not put the control unit on the place that is full with dust or corrosive air ,prevent the dust come into the control unit.
Moisture: do not put the control unit on the moisture place.
Level: the track on the ground need on the standard level ,tight it with expansion bolt.
Display and input buttons
Display | Description |
A1 | Light NO1 |
A2 | Light NO2 |
A3 | Upward moving----see PIC 01 |
A4 | Downward moving---See PIC 02 |
A5 | Auto model |
B1 | Actual value |
B2 | Program mode |
B3 | Manual/auto swich key |
C1 | Top stroke setting |
C2 | Bottom stroke setting |
C3 | Speed setting |
D1 | Manual model switch |
D2 | Power switch OFF |
Note:D1
it is not only for star, and it is key for save program setting
Press B3 
till the A5 is not flash any more(red)—auto working model
Press B3
till the A5 is turn off--- manual working model
When in auto working model, it is controller by power ,in other words when you connect the power , it will work automatic without press any key
When in manual model ,after connected the power , you should press D1 
the host machine
front view
